---

Abstract- A 3-D finite element model is presented to study the thermo-mechanical response of thick plate weldments under different multi-pass welding sequences. The Anand’s Viscoplastic Model is applied to simulate the mechanical response of weldments. The thermal modelling of welding zone is also carried by applying the isothermal melting pool approach. In this research the temperature dependency of thermal and mechanical properties of material is considered and the welding parameters such as arc movement, welding speed and welding lag between each sequence are simulated. Finally, in the FE model the addition of filler material into the welded zone is modeled using the Element Rebirth Technique (ERT). The accumulated results show that, on specific point as the number of layers of weld increases, a noticeable change occurs in the magnitude of maximum temperature and its time of reach. For the points near to the weld line, this change affects the amount of distortion, and the through thickness stress components but it has no significant effect on the residual stress components which may arise in the plane of plates.

---

Will women enjoy the same rights as men on the Day of Judgment or they will face gender discrimination within the framework of rightful justice? Is gender involved in the recompense or comeuppance granted to the people for their eternal living? Will men and women enjoy the same divine favors or men gain further owing to their dominating character? Are heavenly recompenses, material and spiritual pleasures awarded to both men and women equally or women will be next to men? This article is supposed to answer such questions and elucidate the status of women in the afterlife from an Islamic standpoint with involvement of gender on the Doomsday.

---

Proteins are not only considered as a nutritional source but also are responsible for a number of functional properties such as solubility, emulsification, foaming capacity and gel formation in food products. However, insolubility of the proteins (as can be seen in gluten) and therefore their insufficient functional properties have created some limita-tions for their incorporation in formulated foods. Studies have indicated that chemical and/or enzymatic modifications are potential ways to improve proteins functionality. In this study gluten was extracted from two wheat varieties, Sardary and Mahdavi, and then modified by deamidation, acylation (succuinylation and acetylation) as well as enzymatic hydrolysis. Functional properties such as solubility measured as nitrogen solubility (NSI), emulsifying capacity (EC), foaming capacity (FC) and stability (FS) as well as the electro-phoresis patterns of native glutens were studied and compared with those of chemically- and/or enzymatically-treated samples. Most modifications significantly increased NSI from 20 to more than 70% and EC up to 35%. A great increase was also evidenced in foaming capacity that increased from 80 ml of foam volume in native samples to about 180 ml of foam in all the treated samples; however, only deamidated samples had stable foam over the time. Electrophoresis patterns indicated that, among chemical modifica-tions, deamidation caused limited hydrolysis of gluten polypeptides while enzymatic hy-drolysis led to a pronounced reduction in the molecular weight of wheat gluten polypep-tides (less than 15 KD) of both varieties.

---

This work was aimed to investigate the potential preparation of an biodegradable film preparation from bitter vetch seed protein and determine some of its physicochemical properties. The film was cast from bitter vetch protein concentrate (BPC) (5 g/ 100 ml alkaline water) and glycerol (50% w/w of BPC). The moisture content (MC), color, tensile strength (TS), elongation to break (EB), water vapor permeability (WVP) and surface hydrophobicity of the film were measured. The film with MC of 27.69%, TS 5.04 MPa and WVP 0.72 (gmm/KPa.h.m² ) ws comparable with other protein films but its red and yellow indices in color (a=22.41 and b=37.20) and EB were higher than other protein based-films. Its surface hydrophobicity (49.83^°) was higher than that of soy and sodium caseinate protein films and lower than red bean protein film. In general, according to the results, it seems that the film obtained from BPC has a good potential to be used in packaging applications.    

---

This study was carried out to determine the effect of fermentation, hydrothermal treatment, soda (Na2CO3), and table salt (NaCl) addition on the extent of phytase activity and phytate degradation in three Iranian wheat cultivars, namely, Mahdavi, Ghods, and Roshan. The samples were milled to three different extraction rates, i.e. whole, 85%, and 75% flours and three kinds of leavening procedure (fermented, soda, and control), and four NaCl percentages (0.0, 0.5, 1.0, 1.5%) were used for preparing dough in three replications. To evaluate the effect of heat treatment on phytic acid breakdown, baking was also done. The results indicated that among the wheat varieties, Mahdavi had the highest level of phytase activity and phytic acid content followed by Ghods and Roshan; in which‚ most of the phytate was concentrated in bran fractions. Fermentation (1% yeast at 37ºC for 3 hours), hydrothermal treatment (pH 4.8 at 55ºC for 12 hours) and salt addition (0 to 1.5%) to the dough samples resulted in an increased phytase activity, whereas soda addition (1%) decreased the enzyme activity. Heat treatment reduced phytic acid content significantly.

---

The main functions of the packages are: Physical protection, barrier protection, convenience and information. Tendency to minim process food products, quality, safety and preventing of food born disease and strict requirements in relation to consumer health caused ways to use antimicrobial agents in food packaging and prevent the development of microorganism growth. Active packaging is one the methods of efficient packaging, that protect safety and quality of foods. The material of these packages is a suitable base for adding a wide range of different combinations such as antimicrobial agents to them. Pursuant to this, movie bionanocomposite films of Bitter vetch seed’s protein with zinc oxide nanoparticles to produce an antimicrobial packages with %5 w/w of  Bitter vetch protein isolate and 0.25, 1 and 2% zinc oxide nanoparticles. Glycerol was used as plasticizer. The mechanical and barrier properties of bionanocomposite films assessment and determined that the addition of zinc oxide nanoparticles as an antimicrobial agent to the protein film caused a sharp decrease of oxygen permeability through the films. The rate of water vapor permeability of bionanocomposite films decreased comparing with control film. The results indicated that lower levels concentrations of nanoparticles cause better functional properties of bionanocomposites films because of fewer particles coagulation. Effect of nanoparticles on the mechanical properties, tensile strength and modulus of elasticity were increased, but elongation of the film was reduced. 

---

Non- alcoholic malt drinks are popular in many countries including Muslim countries. In Iran, these drinks are prepared in a manner similar to beer, but without fermentation and are generally produced using barley malt. In this study, malt drinks with ratios of 0:100, 25:75, 50:50, 75:25 and 100:0 of barley to oat malts, the latter obtained under optimum conditions in terms of its enzymes activity, were produced and their physicochemical properties along with their storability were evaluated during six months of storage. The results showed that with increasing the proportion of oat malt in drinks, total solids, ash, acidity, reducing and total sugars increased. The results also indicated that by increasing the oat proportion, bitterness, color, turbidity and foam instability increased, while the amount of foam decreased. It was evident that the oat malt had positive effects on color and bitterness as compared with that of barley, and had more antioxidant compounds.

---

It is highly desirable to employ biopreservatives of the antioxidant and antimicrobial properties to avoid the side effects associated with the use of synthetic preservatives. Cake batters containing essential oil extracts of some such Iranian native herbs as: Lemon balm (Melissa officinalis), Camel thorn (Alhagi maurorum) and Ajwain (Trachyspermum copticum), were prepared. The chemical compositions of the essential oil were determined through GC–MS experiments. The shelf lives of the cakes were estimated by TBA (ThioBarbituric Acid) along with mould count measurements at room temperature during a 6 week storage period. The results revealed that these essential oils were fully effective in retarding mould growth and fat rancidity in the cakes. It was therefore concluded that these essential oils are of the potential to be used in the food industry as promising biopreservatives.

---

The aim of this study was to prepare tortilla from oat flour and optimize the physical quality of the resulting product. Inactivated the lipase and peroxidase enzymes in the oat grains were processed during thermal process operation to prevent lipid rancidity and the oat flour was prepared. At the next stage, tortilla was prepared from oat flour.To improve the texture of tortilla, whey, gluten and mono di glyceride isolates were added to oat flour. The effect of the additives was investigated during tissue stress, fragility resistance and colorimetry tests. According to the results,with increasing gluten level, the fragility resistance of the produced sample was increased.Also, with an increase in the dough baking temperature of 140 to 160 degrees Celsius, the brightness of the produced sample was reduced. Then, the produced samples were compared with two commercial samples of "Pringles" and "Tordilla",which were prepared from maize flour,and chemical compounds, texture meter,amino acid content,colorimetry and organoleptic characteristics were studied. According to the results obtained at 5% level, the Tortilla from oat showed no significant difference in terms of the texture and color quality with the two commercial samples of Pringles and Tordilla as well as had higher essential amino acids, low fat and high quality protein content.Also,the tortilla and two commercial samples of  Pringles and Tordilla were evaluated by the assessors in terms of the indicators of crispiness, color, flavor and taste,which had a significant difference at the level of 5%, so that the highest score was for Pringles, Tortilla and Tordilla, respectively.

---

Abstract
Since the dietary fiber has an important role in human nutrition, Incorporation of fibers into bread can compensate for its shortcomings and change it into functional food. Dietary fibers enhance the nutritional value of bread; however, they change the rheological properties of the dough, thus altering the final product quality. The objective of the present study was to investigate the effect of the addition of zucchini powder in different levels of 5%, 10% and 15% to flour, on the rheological properties of the dough as well as physicochemical and sensory properties of bread. In this study, zucchini slices were dried in a hot-air dryer until reaching 9% moisture content. The zucchini powder was prepared and added to wheat flour in different amounts. Rheological properties were measured for each treatment using a Farinograph instrument. The extensibility and tensile strength of the dough in addition to the bread texture were evaluated using a texture analyzer to investigate the bread staling during 72 h. The color of bread was evaluated by measuring L*, a*, and b* Hunter lab color parameters. The 5-point hedonic scale was used to assess the quality of the bread samples. By increasing the zucchini powder percentage, the amount of ash and fiber increased. As the zucchini powder content increased, the water content absorption slightly decreased, however, the stability and quality index of the dough increased. The zucchini powder caused an increase in the dough extensibility and tensile strength. The redness (a* parameter) of bread which was fortified with zucchini powder decreased with increasing zucchini powder. Treated bread texture was softer than the control while the staling rate increased. Sensory evaluation showed that bread containing zucchini powder has higher overall acceptance than the control sample.

---

Bioactive peptides are special protein components that have a significant effect on human body function. In this study, the effect of proteins and peptides resulting from the hydrolysis of amaranth proteins (total protein, albumin, and globulin) at levels 1 to 5% and different hydrolysis times (0.5, 1.5, 3, and 5 hours) on The properties of sourdough and the quality of bread were investigated. The results showed that the peptides obtained by hydrolysis of total amaranth protein in 3 hours had the greatest effect on the growth of Lactobacillus Plantarum (PTCC 1896) (11.40 Log CFU / mL) and Saccharomyces cerevisiae (PTCC 5052)  (8.32 Log CFU / mL) in vitro. These microbes are the main flora of sourdough and different amounts of peptides on their growth were statistically significant compared to the control sample. The titratable acidity and pH ‌ after 16 hours of fermentation at 30 ° C in the wet dough containing 5% peptide were 13.33 mL NaOH and 4.6, respectively, which was higher than other treatments. The highest amount of water activity, specific volume, titratable acidity, and the lowest enthalpy in bread was prepared from sourdough containing 3% peptide. Therefore, bread made from sourdough containing 3% peptides was selected as the best treatment to increase the quality of bread.