Evaluation of Thin-Layer Drying Models for Simulation of Drying Kinetics of Quercus (Quercus persica and Quercus libani) | ||
| Journal of Agricultural Science and Technology | ||
| Article 2, Volume 13, Issue 2, 2011, Pages 155-163 PDF (316.71 K) | ||
| Authors | ||
| M. Tahmasebi1; T. Tavakkoli Hashjin* 1; M. H. Khoshtaghaza1; A. Nikbakht2 | ||
| 1Department of Agricultural Machinery Engineering, Faculty of Agriculture, Tarbiat Modares University, Tehran, Islamic Republic of Iran. | ||
| 2Department of Mechanical Engineering in Agricultural Machinery, Faculty of Agriculture, Urmia University, Urmia, Islamic Republic of Iran. | ||
| Abstract | ||
| Drying characteristics of Quercus were determined experimentally as a function of temperature, air velocity, and variety (Quercus Persica and Quercus Libani). In order to estimate and select a suitable drying curve, five different thin layer drying models were fitted to the experimental data. Experiments were performed at the air temperatures of 50, 60 and 70°C. At each temperature level, two air velocities were adjusted: 0.5 and 1m/s. The effect of air temperature was found to be significant in comparison to air velocity for drying of fresh Quercus fruits. Increasing air velocity at constant air temperature resulted in the decrease of drying time. Among all the selected drying models, the Page model was found as the best mathematical model for describing the drying kinetics of Quercus fruits. Based on the results, drying temperature of 70 oC and air velocity of 1 m/s are the optimum values for drying Quercus fruit. Drying time and Page model constants were found to be dependent significantly on the variables studied. | ||
| Keywords | ||
| Drying kinetics; drying temperature; Page model; Quercus; Thin-Layer drying model | ||
|
Statistics Article View: 124 PDF Download: 111 |
||
| Number of Journals | 45 |
| Number of Issues | 2,174 |
| Number of Articles | 24,684 |
| Article View | 25,074,575 |
| PDF Download | 17,775,566 |