Akay, A.E., Erdas, O., Mahmut, R. and Yuksel, A. Estimating sediment yield from a forest road network by using a sediment prediction model and GIS techniques. J. Build. Environ., 2008; 43: 687-695.
Ampoorter, E, Goris, R., Cornelis, W. and Verheyen, K. Impact of mechanized logging on compaction status of sandy forest soils. Ecol. Manage., 2007; 241(1): 162-74.
Anderson, A., Howard, H., Ayers, P. and Liu, K. Influence of turning radius on wheeled military vehicle induced rut formation. J. Terra. Mech., 2009; 46: 49-55.
Atterberg, A. On the investigation of the physical properties of soils and on the plasticity of clays. Int. Mitt. Bod., 1911; 1: 10-43. (In German).
Azzam, W.R. Behaviour of modified clay microstructure using polymer nano-composites technique. J. Alex. Eng., 2014; 53(1): 143-150.
Crossley, C.P., Kibiwot, V.N., Reynolds, A.J. and Rickson, R.J.W. Soil and water: rut formation and rolling resistance on earth roads. J. Agri. Eng. Res., 2001; 78(1): 99-107.
Ezzati, S., Akbar, N., Rab, M.A. and Zenner, E.K., Recovery of soil bulk density, porosity and rutting from ground skidding over a 20-year period after timber harvesting in Iran. Silva Fennica. 2012; 46(4): 521-538.
Ezzati, S., Najafi, A. and Bettinger, P. Finding feasible harvest zones in mountainous areas using integrated spatial multi-criteria decision analysis. Land Use Policy. 2016; 59: 478-491.
FaridGiglo, B., Arami, A. and Akhzari, D. Assessing the role of some soil properties on aggregate stabilityusing path analysis (case study: silty-clay- loam and clay-loam soil from gully lands in northwest of Iran). J. ECOPERSIA. 2014; 2(2): 513-523.
Gendron, B., Pulkki, R. Posta, M. and Favreau, J. Overview of wood transportation and. forest value chain optimization and sustainability. 2016; 312–330.
Ghajar, I., Najafi, A. Karimimajd, A.M. Boston, K. and Torabi, S.A. A program for cost estimation of forest road construction using engineer's method. For. Sci. Tech. 2013; 9(3): 111–117.
Heninger R, Scott W, Dobkowski A, Miller R, Anderson H, Duke S. Soil disturbance and 10-year growth response of coast Douglas-fir on non-tilled skid trails in the Oregon Cascades. Can. J. Res., 2002; 32: 233-246.
Jaarsma, C.F. and Willems, P.A. Reducing habitat fragmentation by minor rural roads through traffic calming. Landscape Urban Plan. 2002; 58: 125-135.
Kozlowski, T.T. Responses of woody plants to human-induced environmental stresses: issues, problems, and strategies for alleviating stress. Crit. Rev. Plant. Sci., 2000; 19: 91-170.
Liu, J., Shi, B., Jiang, H., Bae, S. and Huang, H. Improvement of water stability of clay aggregates admixed with aqueous polymer soil stabilizers. Catena. 2009; 77: 175-179.
Liu, K., Ayers, P., Howard, H., Jones, R. and Anderson, A. Prediction of rut depth during military vehicle turning manoeuvres using a modified sinkage numeric. J. Transp., 2010; 53: 1019-1024.
Lugo, A.E. and Gucinski, H. Function, effects and management of forest roads. For Ecol. Manage., 2000; 133: 249-262.
Miller, W.P., Willis, R.L. and Levy, G.J. Aggregate stabilization in kaolinitic soils by low rates of anionic polyacrylamide. J. Soil Use Manage., 1998; 14(2): 1001-105.
Najafi, A., Sobhani, H., Saeed, A., Makhdom, M. and Mohajer, M.M. Planning and assessment of alternative forest road and skidding networks. Croat J. Engin., 2008; 29(1): 63-73.
Nguyen, V.N, Matsuo, T., Inaba, S. and Koumoto T. Experimental analysis of vertical soil reaction and soil stress distribution under off-road tires. J. Terra. Mech., 2008; 45: 25-44.
Park, Y., Park, C. and Chon, K. Development of potential measures to evaluate the safety of curves in rural highways. J. Civil. Eng., 2003; 7: 58-70.
Parsakhoo, A. Forest road designing. ISBN: 978-964-151-779-5, Noruzi Press. 2013; 159 P.
Parsakhoo, A., Lotfalian, M. and Hosseini, S.A. Forest roads planning and construction in Iranian forestry. J. Civil. Engin. Const. Tech., 2010; 1(1): 14-18.
Purohit, S.B., Lapalikar, S.R. and Jain, V. Effect of road profile and curves generated by wheel on the performance of a shock absorber of a motorcycle. J. Sci. Tech., 2011; 4: 534-538.
Ryan, T., Phillips, H., Ramsay, J. and Dempsey J. Forest Road Manual: Guidelines for the design, construction and management of forest roads: National Council for Forest Research and Development. COFORD, Dublin. 2004; 170 P.
Sarikhani, N. and Majnonian, B. Guideline for production of forest roads project. J. Plan. Bud. Org. Pub., 1999; 148: 178-192.
Sessions, J. Forest road operations in the Tropics. ISBN-10 3-540-46392-5 Springer-Verlag Berlin Heidelberg New York. 2007; 170 P.
Sharma, R.S., PhaniKumar, B.R. and Rao, B.V. Engineering behaviour of a remoulded expansive clay blended with lime, calcium chloride and rice-husk ash. J. Mat. Civil. Eng., 2008; 20(8): 509-515.
Solgi, A., Najafi, A., Ezzati, S. and Ferencik, M. Assessment of ground-based skidding impacts on the horizontally rate and extent of soil disturbance along the margin of the skid trail. Ann. Scie., 2016; 73(2): 513-522.
Stückelberger, J., Heinimann, H.R. and Chung, W. Improved road network design models with the consideration of various link patterns and road design elements. Can. J. Res., 2007; 37: 2281-2298.
Talebi, M., Majnounian, B., Abdi, E. and Tehrani, F.B. Developing a GIS database for forest road management in Arasbaran forest. J. Sci. Tech., 2015; 11: 27-35. (In Persian).
Way, T.R. Erbach, D.C. and Johnson, C.E. Soil displacement beneath an agricultural tractor drive tire. J. Terra. Mech., 2005; 42: 35-46.
Yetimoglu, T., Inanir. M. and Inanir, O. A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay. J. Geo., 2005; 23: 174-183.